Applying Decals

Application Directions
 Please make sure Temperature is above 55 Degrees..

Step 1: 
Clean the area thoroughly with rubbing alcohol or soap and water. Please do not use Windex or similar glass cleaners, It will prevent Decals from adhering properly...

Step 2: Get the Decal ready for application by firmly rubbing a credit card or squeegee over the clear tape to remove any air bubbles and to make sure Transfer Tape is thoroughly attached to the Decal...

Step 3: Peel off blue backing paper on white Decals or white backing paper on the colored Decals. If the decal is still sticking to the backing paper repeat step 2 until the Decal is completely adhered to the transfer tape...

Step 4: Carefully lower transfer tape and Decal onto surface and rub firmly with credit card, squeegee or something similar to get rid of air bubbles..Allow Decal to set for a while 12-24 hours before moving to next step..

Step 5: Slowly peel off clear transfer tape starting from one of the corners. Be careful not to pull decal off of the surface. If the Decal starts to come off of surface squeegee again and repeat step 4.

Step 6: Enjoy your wonderful new Decal.....

    There are also many good videos on youtube on how to install decals...